This page was last updated on Wednesday, September 19, 2001
Contact Tim Lockwood at lockwood@esu4.org if you have questions about this site
Back to Technology Page * Back to NCECBVI Home Page

STEP-BY-STEP GUIDES

Setting a Juliet Embosser to Interpoint

 

Turn the Juliet Embosser on.

All Entries will be on the 16 key keypad on the right side of the embosser.

 

 

Press     Function                             Action                                              Feedback

OL        (offline/online toggle)        Takes Embosser offline               High tone, Low tone

0.1E      (Start code Entry)           Prepairs Embossers for Codes       Beep Beep

33.0E    (Embosser Interpoint)       Set Embosser to Interpoint          Beep Beep

1.1E      (End Code, Return)           End Coding, Return to Online        Beep Beep, Beep Beep, Song

 

Embosser is now ready to receive Interpoint Braille.

                                               

Setting a Juliet Embosser for Single Sided Embossing

 

Turn the Juliet Embosser on.

All Entries will be on the 16 key keypad on the right side of the embosser.

 

Press     Function                             Action                                              Feedback

OL        (offline/online toggle)        Takes Embosser offline               High tone, Low tone

0.1E      (Start code Entry)           Prepairs Embossers for Codes       Beep Beep

33.1E    (Embosser Single Side)      Set Embosser to single side         Beep Beep

1.1E      (End Code, Return)           End Coding, Return to Online        Beep Beep, Beep Beep, Song

 

Embosser is now ready to receive Single Sided Braille.

           

Loading or Resetting Paper in a Juliet  Embosser

 

Turn the Juliet Embosser OFF.

Open lid and open tractor guides.

Feed Paper into Embosser making sure that the paper is under the silver guide on the left side in front of the tractors.

Feed the paper till the first fold of the paper is touching the  front edge of the embosser.

Check that the tractor pins are in the holes in the paper on both sides of the paper and close the tractor Guides.

Close lid.

Turn Power ON.

 

All Entries will be on the 16 key keypad on the right side of the embosser.

 

Press     Function                             Action                                              Feedback

OL        (offline/online toggle)        Takes Embosser offline               High tone, Low tone

2E        (Seek Paper Edge)           Moves paper to top and online     Beep Beep, Beep Beep, Song

Embosser is now ready.